The DigiVoltŪ series of digital voltmeters and phasing sets are designed to take voltage measurements and perform phasing applications on system voltages up to 80kV. There are eight different models. The NEW DVM25T is a compact, high accuracy single stick voltmeter with capacitive test point mode, universal spline and ground lead. The DVM-25T measures voltages up to 25kV and can be used in both overhead and underground applications.
The DVM80 and DVM80T are compact, high accuracy dual stick voltmeters and phasing sets with connecting cord. The DVM80T includes capacitive test point mode - allowing voltage measurements and phasing to be performed directly from the capacitive test points on the backside of load-break elbow connectors. The DVM80 and DVM80T units measure voltages up to 40kV and up to 80kV with a pair of optional add-on resistors. The two-stick design can be used in both overhead and underground applications. The DVM80 units incorporate Phase Accurate Technology, which makes all voltage readings, whether made from line-to-line or line-to-ground, accurate and repeatable to within 1%.
The DigiVolt-I and III are single-stick voltmeters with one resistive probe, universal spline and ground lead designed for taking line-to-ground measurements up to 20kV. The DigiVolt-II and IV are dual-stick phasing voltmeters for taking line-to-ground and line-to-line measurements up to 50kV. The DigiVolt-III and IV also include a Capacitive Test Point mode. This allows for taking voltage measurements and performs phasing directly from the capacitive test points on the backside of load-break elbow connectors. The less expensive and smaller DigiVolt-V, a two-stick unit for measuring and phasing voltages to 20kV, does not include Peak Hold mode or Capacitive Test Point mode.
